WK2 Nudge Bar

Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It’s made from 304 Stainless Steel and features a specially developed mounting system that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. Best of all, through careful engineering and testing, they’ve created a bar that is 100% compatible with the parking sensors on your WK2.

Parking Sensor Compatibility
Through careful engineering & testing we’ve delivered a nudge bar that is compatible with parking sensors on most WK2 models.

Excellent Approach Angle
Since our design doesn’t extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.

High Strength
Our innovative mounting system uses tapered steel tabs to lock the bar securely to 20mm high-strength steel mounting arms like a lug nut locks a wheel to a car. This high-strength design means there will be minimal vibrations for your accessories when you’re off-road.

Highly Scratch Resistant
By using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we’re able to provide a nudge bar with much better scratch & wear resistance.

Low Installed Weight
Only 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) – 90kgs (steel).

Accommodates Numerous Lighting & Accessory Options
The accessory mounting tab is slotted across it’s entire length, allowing you to install lights or accessories however you choose.

Contoured To Fit
The accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.

Compatible With Front Recovery Points
Can be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg [1.5 GVM]). Due to mounting restrictions, many nudge bars don’t allow you to install any front recovery points with their bar.

Compatible With Adaptive Cruise Control
Through careful engineering & testing we’ve delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.

Guards Against Damage During Recovery
The mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.

Industry Leading Corrosion Protection
We utilise E-Coat (Electrophoretic Coating) on the mounting arms and bracketry to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

Mirror Polish That Lasts
Our mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.

Top Quality Finishing Touches
We include all the details that matter. Heavy Duty Powder Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.


304 Stainless Steel (Excellent Corrosion & Scratch Resistance)
Bar Assembly = Mirror Polished or Durable Powder Coat Finish
Mounting Arms = E-Coat + Durable Powder Coat Finish
Easy Installation (Difficulty = 2/10)

Fully Installed Weight = 10.6kg (Including Mounting Hardware)
Bar Diameter = 63.5mm
Mounting Tab Total Length = 629mm (24.76 inches)
Mounting Tab Slot Length = 598.7mm (23.57 inches)
Brinell Hardness = 123 (Excellent Scratch Resistance)
Approach Angle = 29.4˚ (lower front fascia removed + standard suspension)
Approach Angle = 33.3˚ (lower front fascia removed + air suspension OR2)
Approach Angle = Same As Stock (lower front fascia installed)

1 – Bar Assembly (304 Stainless Steel)
2 – Chassis Mounting Arms
4 – Chassis Mounting Plates
2 – M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
2 – M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
4 – M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
2 – M10 Nuts (Zinc Plated)
10 – M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
1 – 4g pouch Anti-Seize

Bolts into existing mounting points in the frame, no drilling or cutting needed.

WK2 Nudge Bar fits the following vehicles:
2011 Jeep Grand Cherokee – Laredo, Limited & Overland
2012 Jeep Grand Cherokee – Laredo, Limited, Overland & Altitude
2013 Jeep Grand Cherokee – Laredo, Limited, Overland, Altitude & Trailhawk
2014 Jeep Grand Cherokee – Laredo, Limited, Overland, Summit, Altitude & Blackhawk
2015 Jeep Grand Cherokee – Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude
2016 Jeep Grand Cherokee – Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition
2017 Jeep Grand Cherokee – Laredo, Limited, Overland, Summit, Altitude & Trailhawk
2018 Jeep Grand Cherokee – Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

* Fits USA & Export models.
** Fitment on all Summit, High Altitude & Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia for the mounting brackets. Instructions are not currently provided for this modification.

Fitment unconfirmed on the following vehicles:
2012-2018 Jeep Grand Cherokee – SRT

Fitment confirmed with the following products:
WK2 Recovery Point
WK2 Recovery Hook
WK2 Sump Protection Plate
WK2 Lower Front Guard

Does NOT fit with the following products:
OEM Tow Hooks (part# 82212095)
Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)


Make Model Year
Jeep Grand Cherokee